how to run JSP using Jserv under Apache?

hello. i'm working on an issue, where we want our index.jsp (the first
page that shows up on our site) to ACT like a JSP page. Currently, it
only acts as an html page. I've done alot of research in the past few
days, and I'm hoping that someone could help me out.

I guess the best way to demonstrate where i'm at is to include the
httpd.conf file here.. please, if someone can take a look, more
specifically, near the bottom where it shows me opening up the
jserv.conf file, and jsp files, and PLEASE let me know what i'm doing
wrong.

thanks a bunch!

##
## httpd.conf -- Apache HTTP server configuration file
##

#
# Based upon the NCSA server configuration files originally by Rob
McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are
unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# /devl/ics3/devl/apache/srm.conf and then
/devl/ics3/devl/apache/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server
process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default'
server,
# which responds to requests that aren't handled by a virtual
host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent
to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive:/" for
Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by
the
# server as "/usr/local/apache/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of
Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone. Inetd mode is only
supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/oraapp/9iAS10220/home/Apache/Apache"

#
# The LockFile directive sets the path to the lockfile used when
Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left
at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A
LOCAL
# DISK. The PID of the main server process is automatically appended
to
# the filename.
#
#LockFile /devl/ics3/devl/apache/logs/httpd.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /devl/ics3/devl/apache/logs/httpd.pid

#
# ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this. But if yours does (you'll know
because
# this file will be created when you run Apache) then you *must*
ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /devl/ics3/devl/apache/logs/httpd.scoreboard

#
# In the standard configuration, the server will process httpd.conf
(this
# file, specified by the -f command line option), srm.conf, and
access.conf
# in that order. The latter two files are now distributed empty, as
it is
# recommended that all directives be kept in a single file for
simplicity.
# The commented-out values below are the built-in defaults. You can
have the
# server ignore these files altogether by using "/dev/null" (for Unix)
or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited
amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request
from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle
transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#
MinSpareServers 1
MaxSpareServers 2

#
# Number of servers to start initially --- should be a reasonable
ballpark
# figure.
#
StartServers 1

#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO
LOW.
# It is intended mainly as a brake to keep a runaway server from
taking
# the system with it as it spirals down...
#
MaxClients 150

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems,
this
# isn't really needed, but a few (such as Solaris) do have notable
leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the
initial
# request per connection. For example, if a child process
handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 172.18.4.13:80

#
# BindAddress: You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain
name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress 172.18.4.13

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Please read the file README.DSO in the Apache 1.3 distribution for
more
# details about the DSO mechanism and run `httpd -l' for the list of
already
# built-in (statically linked and thus always available) modules in
your httpd
# binary.
#
# Note: The order in which modules are loaded is important. Don't
change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule rewrite_module libexec/mod_rewrite.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule example_module libexec/mod_example.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
LoadModule oprocmgr_module libexec/liboprocmgr.so
LoadModule define_module libexec/mod_define.so
LoadModule dms_module libexec/mod_dms.so
LoadModule perl_module libexec/libperl.so
LoadModule fastcgi_module libexec/mod_fastcgi.so
<IfDefine SSL>
LoadModule ssl_module libexec/mod_ssl.so
</IfDefine>

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# If your ServerType directive (set earlier in the 'Global
Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#

#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
#Port 7777
#Listen 7777
#Port 80
#Listen 80

##
## SSL Support
##
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
##
<IfDefine SSL>
# Port 80
Listen 172.18.4.13:80
Listen 172.18.4.13:443
</IfDefine>

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and
the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
#
User ics3devl
Group ics3devl

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin you.RemoveThis@your.address

#
# ServerName allows you to set a host name which is sent back to
clients for
# your server if it's different than the one the program would get
(i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name
you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP
address here.
# You will have to access it by its address (e.g.,
<a style='text-decoration: underline;' href="http://123.45.67.89/" target="_blank">http://123.45.67.89/</a>)
# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named
localhost. Your
# machine always knows itself by this address. If you use Apache
strictly for
# local testing and development, you may use 127.0.0.1 as the server
name.
#
ServerName 172.18.4.13

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/devl/ics3/devl/webroot/apache"

#
# Each directory to which Apache has access, can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/devl/ics3/devl/webroot/apache">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
Options Indexes FollowSymLinks MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options",
"FileInfo",
# "AuthConfig", and "Limit"
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user's
home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>

#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a pre-written
HTML
# directory index. Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
DirectoryIndex index.html index.jsp
</IfModule>


#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
with each
# document that was negotiated on the basis of content. This asks
proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName: (new for 1.3) With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a URL that refers
back
# to the server the response is coming from) it will use ServerName
and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName off

# Add 2003/1/3 test for dynamic virtyal host
# VirtualDocumentRoot /devl/ics3/moff/webroot/oc4j/ct/web/store/%1

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
TypesConfig /devl/ics3/moff/apache/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain"
is
# a good value. If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type. The
MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule>
container.
# This means that the MIMEMagicFile directive will only be processed
if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile /devl/ics3/devl/apache/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., <a style='text-decoration: underline;' href="http://www.apache.org" target="_blank">www.apache.org</a> (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to
the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
<VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /devl/ics3/devl/apache/logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile
Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /devl/ics3/devl/apache/logs/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /devl/ics3/devl/apache/logs/referer_log referer
#CustomLog /devl/ics3/devl/apache/logs/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /devl/ics3/devl/apache/logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory
listings,
# mod_status and mod_info output etc., but not CGI generated
documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The
format is
# Alias fakename realname
#
<IfModule mod_alias.c>

#
# Note that if you include a trailing / on fakename then the
server will
# require it to be present in the URL. So "/icons" isn't aliased
in this
# example, only "/icons/"..
#
Alias /icons/ "/oraapp/9iAS10220/home/Apache/Apache/icons/"

<Directory "/oraapp/9iAS10220/home/Apache/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

Alias /jservdocs/ "/oraapp/9iAS10220/home/Apache/Jserv/docs/"
Alias /soapdocs/ "/oraapp/9iAS10220/home/soap/"
Alias /perl/ "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin/"
Alias /images/ "/devl/ics3/devl/webroot/apache/images/"
Alias /Fc/ "/devl/ics3/devl/webroot/apache/Fc/"
Alias /html/ "/devl/ics3/devl/webroot/apache/html/"
Alias /gftlist/ "/devl/ics3/devl/webroot/apache/gftlist/"
Alias /articles/ "/devl/ics3/devl/webroot/apache/articles/"
Alias /js/ "/devl/ics3/devl/webroot/apache/js/"
Alias /css/ "/devl/ics3/devl/webroot/apache/css/"
Alias /coremetrics/ "/devl/ics3/devl/webroot/apache/coremetrics/"


#
# ScriptAlias: This controls which directories contain server
scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications
and
# run by the server when requested rather than as documents sent
to the client.
# The same rules about trailing "/" apply to ScriptAlias
directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/devl/ics3/devl/webroot/apache/cgi-bin/"
ScriptAlias /cyber/
"/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi/"

#
# "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin" should be changed
to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

<Directory "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which used to
exist in
# your server's namespace, but do not anymore. This allows you to tell
the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory
listings.
#
<IfModule mod_autoindex.c>

#
# FancyIndexing is whether you want fancy directory indexing or
standard
#
IndexOptions FancyIndexing

#
# AddIcon* directives tell the server which icon to show for
different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an
icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a
file in
# server-generated indexes. These are only displayed for
FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look
for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
#
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and
include
# it as plaintext if found.
#
ReadmeName README
HeaderName HEADER

#
# IndexIgnore is a set of filenames which directory indexing
should ignore
# and not include in the listing. Shell-style wildcarding is
permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have
nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# AddLanguage allows you to specify the language of a document.
You can
# then use content negotiation to give a browser a file in a
language
# it can understand.
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three
char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
#
AddLanguage da .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8

# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We
have
# more or less alphabetized them here. You probably want to change
this.
#
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br
ru ltz ca es sv tw
</IfModule>

#
# AddType allows you to tweak mime.types without actually editing
it, or to
# make certain files to be certain types.
#
# For example, the PHP 3.x module (not part of the Apache
distribution - see
# <a style='text-decoration: underline;' href="http://www.php.net" target="_blank">http://www.php.net</a>) will typically use:
#
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
#
# And for PHP 4.x, use:
#
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps

AddType application/x-tar .tgz

#
# AddHandler allows you to map certain file extensions to
"handlers",
# actions unrelated to filetype. These can be either built into
the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
#AddHandler cgi-script .cgi

#
# To use server-parsed HTML files
#
#AddType text/html .shtml
#AddHandler server-parsed .shtml

#
# Uncomment the following line to enable Apache's send-asis HTTP
file
# feature
#
#AddHandler send-as-is asis

#
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map

#
# To enable type maps, you might want to use
#
#AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script
whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can
find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing
the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
# these come in three flavors
#
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get
output
#
# 2) local redirects

ErrorDocument 404 /404error.htm
ErrorDocument 500 /500error.htm

# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using
server-side-includes.
#
# 3) external redirects
#ErrorDocument 402 <a style='text-decoration: underline;' href="http://some.other_server.com/subscription_info.html" target="_blank">http://some.other_server.com/subscription_info.html</a>
# N.B.: Many of the environment variables associated with the
original
# request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and
browsers that
# spoof it. There are known problems with these browser
implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect)
responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0

#
# The following directive disables HTTP/1.1 responses to browsers
which
# are in violation of the HTTP/1.0 spec by not being able to grok
a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of
<a style='text-decoration: underline;' href="http://servername/server-status" target="_blank">http://servername/server-status</a>
# Change the ".your_domain.com" to match your domain to enable.
#
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost web1-v3
</Location>

#
# Allow remote server configuration reports, with the URL of
# <a style='text-decoration: underline;' href="http://servername/server-info" target="_blank">http://servername/server-info</a> (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from localhost web1-v3
#</Location>

#
# There have been reports of people trying to abuse an old bug from
pre-1.1
# days. This bug involved a CGI script distributed as a part of
Apache.
# By uncommenting these lines you can redirect these attacks to a
logging
# script on phf.apache.org. Or, you can record them yourself, using
the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 <a style='text-decoration: underline;' href="http://phf.apache.org/phf_abuse_log.cgi" target="_blank">http://phf.apache.org/phf_abuse_log.cgi</a>
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
# ProxyRequests On

# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing
Via: headers)
# Set to one of: Off | On | Full | Block
#
# ProxyVia On

#
# To enable the cache as well, edit and uncomment the following
lines:
# (no cacheing without CacheRoot)
#
# CacheRoot "/oraapp/9iAS10220/home/Apache/Apache/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on
your
# machine you can setup VirtualHost containers for them. Most
configurations
# use only name-based virtual hosts so the server doesn't need to
worry about
# IP addresses. This is indicated by the asterisks in the directives
below.
#
# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
# Use name-based virtual hosting.
#
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
#NameVirtualHost *

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
# ServerAdmin webmaster.RemoveThis@host.some_domain.com
# DocumentRoot /www/docs/host.some_domain.com
# ServerName host.some_domain.com
# ErrorLog logs/host.some_domain.com-error_log
# CustomLog logs/host.some_domain.com-access_log common
#</VirtualHost>

#<VirtualHost _default_:*>
#</VirtualHost>
##

## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##

#
# Some MIME-types for downloading Certificates and CRLs
#
<IfDefine SSL>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
</IfDefine>

<IfModule mod_ssl.c>

# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin

# Inter-Process Session Cache:
# Configure the SSL Session Cache: First either `none'
# or `dbm:/path/to/file' for the mechanism to use and
# second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache
shm:/devl/ics3/devl/apache/logs/ssl_scache(512000)
SSLSessionCache dbm:/devl/ics3/devl/apache/logs/ssl_scache
SSLSessionCacheTimeout 300

# Semaphore:
# Configure the path to the mutual explusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex file:/devl/ics3/devl/apache/logs/ssl_mutex

# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough
entropy
# is available. This means you then cannot use the /dev/random
device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl
User
# Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512

# Logging:
# The home of the dedicated SSL protocol logfile. Errors are
# additionally duplicated in the general error log file. Put
# this somewhere where it cannot be used for symlink attacks on
# a real server (i.e. somewhere where only root can write).
# Log levels are (ascending order: higher ones include lower ones):
# none, error, warn, info, trace, debug.
SSLLog /devl/ics3/devl/apache/logs/ssl_engine_log
SSLLogLevel warn

</IfModule>

<IfDefine SSL>

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

# General setup for the virtual host
DocumentRoot "/devl/ics3/devl/webroot/apache"
ServerName 172.18.4.13
ServerAdmin you.RemoveThis@your.address
ErrorLog /devl/ics3/devl/apache/logs/error_log
TransferLog /devl/ics3/devl/apache/logs/access_log

# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on

# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server.crt
#SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server-dsa.crt

# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server.key
#SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server-dsa.key

# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /devl/ics3/devl/apache/ssl.crt/ca.crt

# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /devl/ics3/devl/apache/ssl.crt
#SSLCACertificateFile /devl/ics3/devl/apache/ssl.crt/ca-bundle.crt

# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /devl/ics3/devl/apache/ssl.crl
#SSLCARevocationFile /devl/ics3/devl/apache/ssl.crl/ca-bundle.crl

# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10

# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This
means that
# the standard Auth/DBMAuth methods can be used for access
control. The
# user name is the `one line' version of the client's X.509
certificate.
# Note that no password is obtained from the user. Every entry in
the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables:
SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of
the
# server (always existing) and the client (only existing when
client
# authentication is used). This can be used to import the
certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment
variables.
# Per default this exportation is switched off for performance
reasons,
# because the extraction step is an expensive operation and is
usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward
compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x.
Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied
even
# under a "Satisfy any" situation, i.e. when it applies access is
denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling
when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars
+StrictRequire
<Files ~ "\.(cgi|shtml)$">
SSLOptions +StdEnvVars
</Files>
#<Directory "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin">
<Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>

# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't
wait for
# the close notify alert from client. When you need a different
shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed,
i.e. no
# SSL close notify alert is send or allowed to received. This
violates
# the SSL/TLS standard but is needed for some brain-dead browsers.
Use
# this when you receive I/O errors because of the standard
approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed,
i.e. a
# SSL close notify alert is send and mod_ssl waits for the close
notify
# alert of the client. This is 100% SSL/TLS standard compliant,
but in
# practice often causes hanging connections with brain-dead
browsers. Use
# this only for browsers where you know that their SSL
implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the
HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for
this.
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown

# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog /devl/ics3/devl/apache/logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

</IfDefine>

<IfModule mod_dms.c>
<Location /dms0>
SetHandler dms-handler
</Location>
</IfModule>

#
# Perl Directives
#
#PerlWarn On
#PerlFreshRestart On
#PerlSetEnv PERL5OPT Tw
#PerlSetEnv PERL5LIB
"/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
SetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
PerlModule Apache
#PerlModule Apache::Status
PerlModule Apache::Registry
#PerlModule Apache::CGI
#PerlModule Apache::DBI
#PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>

#<Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from .your_domain.com
#</Location>


# Setup of oprocmgr module.
#
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local
Apache
# instances. This directive is used by the local process manager to
share
# routing information with remote apache instances via non-SSL HTTP
messages.
# The directive is repeated for each remote apache instance that will
be
# sending requests. The ProcNode directive that refers to the local
apache
# instance will be ignored, but may be supplied to facilitate
uniformity
# in configuration across apache instances. Arguments to the ProcNode
must
# be sufficient to reach the remote instance of apache via non-SSL
HTTP
# messages. It is not considered an error if the remote apache
instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777

<IfModule mod_oprocmgr.c>
ProcNode web1-v3 7777
<IfDefine SSL>
ProcNode web1-v3 80
</IfDefine>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
</Location>
</IfModule>


# Setup of FastCGI module

<IfModule mod_fastcgi.c>
Alias /fastcgi/ "/devl/ics3/devl/webroot/apache/fastcgi/"
ScriptAlias /fcgi-bin/ "/devl/ics3/devl/webroot/apache/fcgi-bin/"
<Directory "/devl/ics3/devl/webroot/apache/fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
  <IfDefine SSL>
SSLOptions +StdEnvVars
  </IfDefine>
</Directory>
</IfModule>

<IfModule mod_proxy.c>
proxyRequests off
proxyPass /cust <a style='text-decoration: underline;' href="http://172.18.4.13:7778/cust" target="_blank">http://172.18.4.13:7778/cust</a>
proxyPassReverse /cust <a style='text-decoration: underline;' href="http://172.18.4.13:7778/cust" target="_blank">http://172.18.4.13:7778/cust</a>
proxyPass /ct <a style='text-decoration: underline;' href="http://172.18.4.13:7778/ct" target="_blank">http://172.18.4.13:7778/ct</a>
proxyPassReverse /ct <a style='text-decoration: underline;' href="http://172.18.4.13:7778/ct" target="_blank">http://172.18.4.13:7778/ct</a>
</IfModule>

#<IfModule mod_proxy.c>
# proxyRequests on
# proxyPass /ct <a style='text-decoration: underline;' href="http://172.18.4.13:7778/ct" target="_blank">http://172.18.4.13:7778/ct</a>
# proxyPassReverse /ct <a style='text-decoration: underline;' href="http://172.18.4.13:7778/ct" target="_blank">http://172.18.4.13:7778/ct</a>
#</IfModule>


# Include the configuration files needed for jserv
include "/oraapp/9iAS10220/home/Apache/Jserv/etc/jserv.conf"
ApJServMount / /ct
AddType text/jsp .jsp
AddHandler jserv-servlet .jsp

# Include the Oracle configuration file for custom settings
#include "/devl/ics3/devl/apache/oracle_apache.conf"

<VirtualHost 172.18.4.13:80>
ServerName ics3dv1ws1.hq.bradgroup
DocumentRoot /devl/ics3/devl/webroot/apache
ServerAlias <a style='text-decoration: underline;' href="http://www.ics3dv1ws1.hq.bradgroup" target="_blank">www.ics3dv1ws1.hq.bradgroup</a>
</VirtualHost>

# <VirtualHost 172.18.4.13:80>
ServerName %1.collectiblestoday.com
VirtualDocumentRoot /devl/ics3/devl/webroot/oc4j/ct/web
# </VirtualHost><!-- ~MESSAGE_AFTER~ -->