Apache don't execute CGI's (from Nagios)

Hi all,
I try to install Nagios, the compalation was successful and it seem's
everything works fine. But when I try to enter a function (of Nagios) on
the WebInterface Apache do not execute the CGI (written in C) and just
send me the file.

The system is running the Debian's Woody-
I've never worked with cgi's befor so may be it's a newbe mistake. Any
idea's.

Thanx a lot
Mo

Moritz Behnk <news.TakeThisOut@dontspamme.behnk-sys.de> wrote:
 > the WebInterface Apache do not execute the CGI (written in C)

If the cgi is in C must be compiled and the exec bit must be set.
Check your installation and the configuration of your apache. Be sure
you've put the cgis in the cgi-bin dir or the directory have the
+ExecCGI option set.

Davide

--
| When I heated my home with oil, I used an average of 800 gallons a
| year. I have found that I can keep comfortably warm for an entire
| winter with slightly over half that quantity of beer.
|<!-- ~MESSAGE_AFTER~ -->